Donate Bitcoin

Donate Paypal


PeakOil is You

PeakOil is You

DIY Shoe Resoling

What's on your mind?
General interest discussions, not necessarily related to depletion.

DIY Shoe Resoling

Unread postby JeeBoomba » Tue 18 Mar 2008, 14:20:59

So I walk a lot and due to the nature of my footstrike (I'm an underpronator), I tend to wear out the rubber of the bottoms of my shoes long before the upper or insole is worn much at all.
So I've been thinking that I should just find a way to attach fresh rubber to the bottoms and thus get way more life out of them. But, these aren't dress shoes with a detachable heal and sole--these are regular athletic shoes. I know that contact cement will probably work to attach the patches/new soles, but does anyone have any idea of what material I should use to make the actual new soles, and where to find it?
I'm a pretty resourceful guy, but I can't find anything appropriate, except for the soles sold for resoling dressing shoes, but those really aren't right for the athletic shoes I wear.
User avatar
JeeBoomba
Peat
Peat
 
Posts: 86
Joined: Tue 09 Aug 2005, 03:00:00

Re: DIY Shoe Resoling

Unread postby lawnchair » Tue 18 Mar 2008, 15:44:19

In much of the third world, old used non-belted auto tires are popular for cutting out foot-patterns as replacement soles or making simple sandals. Doing it with modern belted radials takes more skill to keep steel wires from poking through. I have a pair of tire tread and sisal rope sandals. They last forever!
At 1% annual growth, human bodies will incorporate every gram in the observable universe in approximately 10,170 years.
User avatar
lawnchair
Tar Sands
Tar Sands
 
Posts: 866
Joined: Wed 20 Oct 2004, 03:00:00

Re: DIY Shoe Resoling

Unread postby perdition79 » Tue 18 Mar 2008, 16:11:17

$this->bbcode_second_pass_quote('lawnchair', 'I')n much of the third world, old used non-belted auto tires are popular for cutting out foot-patterns as replacement soles or making simple sandals. Doing it with modern belted radials takes more skill to keep steel wires from poking through. I have a pair of tire tread and sisal rope sandals. They last forever!


Anyone looking to make their own car-tire soles can find plenty of used bias-ply tires at a local dragstrip. The tread is completely smooth, but incredibly sticky on dry pavement.
http://www.thepeoplescube.com/

"We are building a religion; we are building it bigger. We are widening the corridors and adding more lanes."
Cake - Comfort Eagle
User avatar
perdition79
Tar Sands
Tar Sands
 
Posts: 553
Joined: Fri 21 Apr 2006, 03:00:00
Location: Babylon

Re: DIY Shoe Resoling

Unread postby JeeBoomba » Tue 18 Mar 2008, 16:14:22

Car tires are way thicker than what I'm thinking. Perhaps old bicycle tires would be more appropriate. I wonder what bike shops do with old tires. I should call and find out.
User avatar
JeeBoomba
Peat
Peat
 
Posts: 86
Joined: Tue 09 Aug 2005, 03:00:00

Re: DIY Shoe Resoling

Unread postby lawnchair » Tue 18 Mar 2008, 16:20:52

For a thinner similar material, watch on the side of the road for a detached retread "cap" off a semi tire. They're everywhere around here.
At 1% annual growth, human bodies will incorporate every gram in the observable universe in approximately 10,170 years.
User avatar
lawnchair
Tar Sands
Tar Sands
 
Posts: 866
Joined: Wed 20 Oct 2004, 03:00:00

Re: DIY Shoe Resoling

Unread postby Ludi » Tue 18 Mar 2008, 17:28:08

Ludi
 

Re: DIY Shoe Resoling

Unread postby alokin » Wed 19 Mar 2008, 00:42:25

Bicycle tyres are usually totally weared our before changed, and you must have a very tiny foot.
Can anyone provide some car tyre shoe photo? A car tyre is round and I cannot imagine how you make flat shoes out of it.
I would not use it for a direct contact with the foot as there are lots of nasties in a tyre.

Isn't the thread better for "preparation"?
User avatar
alokin
Heavy Crude
Heavy Crude
 
Posts: 1255
Joined: Fri 24 Aug 2007, 03:00:00

Re: DIY Shoe Resoling

Unread postby JeeBoomba » Wed 19 Mar 2008, 10:52:44

$this->bbcode_second_pass_quote('alokin', 'B')icycle tyres are usually totally weared our before changed, and you must have a very tiny foot.

Actually, my feet are pretty huge--I wear size 11 EEEE. Due to the way I walk, the outside edge of my shoes wear faster than than inside edge (the underpronation thing I mentioned). I don't need to resole the whole bottom, just the outside edges really. So I really need more of a rubber shim than an entire sole.
User avatar
JeeBoomba
Peat
Peat
 
Posts: 86
Joined: Tue 09 Aug 2005, 03:00:00


Return to Open Topic Discussion

Who is online

Users browsing this forum: No registered users and 1 guest

cron