by vtsnowedin » Tue 26 Sep 2017, 20:37:17
$this->bbcode_second_pass_quote('dissident', 'P')eople are usually too impatient and think their chainsaw will force its way through any situation. Never, ever force the chainsaw. If there is no slack then you are doing it wrong. Cut wedges even if that means you don't get instant gratification. Put some intellectual effort into planning the cut. The temptation to "wing it" is great and can be fatal.
I cut firewood by selectively harvesting dying standing trees or wind fallen trees on the two concession lots I own.
Not even the sharpest chainsaw can push through if the tree has decided to fall back and close the kurfe it cut out on the way in. By watching closely I can often see the kurfe beginning to close and draw the blade out before it is pinched. Then I have the option of making a notch cut opposite the one I first made or just going back to my first notch cut and cutting it into the new hinge point. If you get pinched the best thing to do is unbolt the blade and chain and place the saw"s motor well out of danger or bolt on a spare bar and chain if you don't have a spare saw handy by.
The worst thing (other then having a tree fall on you personally) is to have a saw get pinched and then have the tree twist around on it's hinge (which you cut wrong)and drop off the stump right on top of your saw. The bar ends up with almost a perfect right angle bend in it and the motor ends up as a collection of mashed parts that tinkle out of the box as you poor them onto your work bench. Kiss $500 good by!